As a reliable and trusted plumbing company, we are committed to pipe relining Sydney. Our experienced team uses proven technology without excavation for repairing your drain pipes.

Through our efficient, effective pipe relining service, we ensure minimal downtime and long-lasting results for any type of pipe—including stormwater pipes and sewer pipes.

What is Pipe Relining?

Pipe relining, commonly referred to as trenchless pipe replacement is how Silver Water Plumbing repairs damaged pipes. It also gives you a hassle-free restoration solution by not requiring excavation after the repair has been done if your pipe issues are in Sydney. Pipe relining could be the perfect remedy for your piping problems in Sydney, neatly put. This innovative technique allows you to dodge the traditional way of digging up your yard or breaking walls to access and replace damaged pipes.

So how does Sydney pipe relining work? First, a resin-covered liner is placed into the existing pipe. It is then inflated until it hardens, forming a new pipe within the old one. Basically, this process closes any cracks, leaks, or corrosion that may have developed in your sewer pipes and restores them back to their original functioning capabilities. This impressive durable and long-lasting solution eliminates cost savings and room for disruption during excavation when compared to traditional methods of replacement requirements.

Compared to traditional methods, trenchless pipe relining has several benefits. First of all, there’s no massive digging or demolition work involved since the process is instantaneous and very fast. This enables your plumbing issues to be resolved quickly thus minimizing any inconvenience caused by blocked drains or leaking pipes. Additionally, trenchless pipe relining is cost-efficient since expensive excavation equipment isn’t required and labor costs are saved.

So, sewer pipe relining from Silver Water Plumbing? We’ll replace the old pipes in your house and provide all these benefits while being sure to back our workmanship with our satisfaction guarantee. Our experienced plumbers have been trained in this advanced art and will promptly and reliably service you whenever the occasion arises.

Don’t ruin your day over bad pipes. Call our Sydney relining company, Silver Water Plumbing at (02) 9199 2055 for a hassle-free pipe reline service that takes care of your requirements. Say goodbye to excavation nightmares and welcome efficient and professional repairs with our trenchless pipe relining service in Sydney!

Pipe Relining Process for Sewers and Stormwater Drains

Before you start the pipe relining process, make sure to check the condition of your piping system and also if there is any collapsed pipes. You’ll need to know this important stuff in determining whether pipe relining will be a good idea for you. Thankfully, in Sydney, we’re experts at pipe relining so you can rely on our professional checks and recommendations.

Once it’s determined pipe relining is the best option for your sewer repair or trenchless pipe repair needs, the process can start. Here’s a breakdown of what you can expect in regard to the underground pipe relining process:

1. CCTV Inspection: A small camera will be inserted into your pipes to assess their condition. This allows plumbers to identify any cracks, leaks, or blockages that may exist.

2. Pipe Cleaning: Before relining can take place, thorough cleaning of the pipes is necessary. High-pressure water jetting or mechanical cleaning methods are used to remove any debris or buildup that could affect the adhesion of the lining material.

3. Lining Installation: A flexible liner coated with a special resin is inserted into the damaged pipe using compressed air or water pressure after which it will be inflated and left to cure for several hours until it hardens and forms new strong inner layer within your existing pipes.

The whole process usually takes a few hours to go through, dependent on the extent of damage and complexities involved.

Pipe relining offers several benefits compared to the traditional dig-and-replace method. It eliminates costly excavation work as well as disrupting your property and landscaping. With this trenchless technology, you can have peace of mind knowing that your underground pipes are efficiently repaired without causing further damages.

For Sydney pipe relining, trust experienced firms like Silver Water Plumbing that solely specializes in this brilliant method for sewer repair and underground pipe relining. We’ll provide you with a hassle-free experience without compromising on the long lasting fixes all your plumbing needs require.

Pipe Relining vs Pipe Replacement

You might be wondering about the differences between pipe relining versus pipe replacement for the best option on your sewer repair or trenchless pipe repair needs.

As far as Sydney relining is concerned, it provides a cost-effective and quick method of repairing damaged pipes without the necessity for an excavation. Pipe relining entails putting in place a new liner inside an existing pipe that creates a seamless as well as durable barrier against leakage, cracks, and tree root intrusions.

Pipe replacement, on the other hand, entails totally removing the old pipe and replacing it with a new one. This process is extensive as trenches are dug to access damaged section of sewer line. Whereas traditional pipe replacement acts effectively enough though costly because of labour-intensive excavation work.


Pipe relining in Sydney offers numerous benefits as compared to traditional pipe replacement. First, it saves you from extensive property damage since there is no need for digging up your yard or breaking through walls and floors. The existing pipe resembles a host for the new liner thus eliminating the need of complete removal.

Secondly, since there is no excavation involved with pipe relining, it greatly reduces the overall timeline of the project. You can have your pipes repaired quickly and efficiently without disturbing you during your everyday routine.

Thirdly, by opting for pipe relining instead of replacing the pipes in Sydney, you can save on costs. The absence of excavation means fewer materials required as well as less labor involved.

In conclusion, if you’re looking for an effective way of reviving your damaged sewer line without causing major disruptions or breaking the bank, then consider opting towards professional pipe relining services in Sydney. It offers a long-lasting solution that ensures functionality to your plumbing system while minimizing downtime and costs associated with traditional pipe replacement methods.

What Are The Different Types Of Pipe Relining Solutions?

There are different kinds of technologies on pipe relining existing in Australia. These include:

  1. Cured in place pipe lining (CIPP): This is the most common method of residential pipe rehabilitation in Australia and New Zealand. It involves inserting a flexible liner coated with resin into the damaged pipe. The liner is then inflated and cured in place using hot water or steam, creating a new pipe within the old one.
  2. Pull-in place: This method involves pulling a liner coated with resin through the damaged pipe and curing it in place using hot water or steam. This method is often used for pipes with multiple bends or changes in diameter.
  3. Pipe bursting: This method is where old pipe gets broken down into chunks and then replaced by new ones in their original positions getting inserted inside the old pipe and then pushed through breaking apart the old pipe so as to replace it up on their original places.
  4. Sliplining: In this method, an old pipe is replaced by making it slightly smaller in the diameter and permitting it to slide into place. Once inside, the annular space between the old and new pipes is grouted so as to form a watertight amount of sealer.
  5. Internal pipe coating: This technique entails spraying or applying some material or coating such that it hardens to create some sort of a smooth surface design inside the pipe.

Pipe Relining vs Pipe Patching

Pipe patching makes use of this method for repairing damaged pipes and offers a quicker with an issue of temporary fix. Pipe relining basically creates an entirely new being inside the existing one. The pipe patching merely patches up the damaged areas of the pipe. This way is mostly used in sewer’s minor damages or leaks.

When it comes to pipe relining, most of the time that Sydney residents opt for this over patching procedure because in some ways gives a more lasting solution on drain repairs. Pipe relining entails inserting such a flexible liner coated with epoxy resin inside the damaged pipe. The latter is then rolled and left to cure creating a strong durable new pipe inside your old one. This process cuts down on excavation and disruption of your property.

Pipe patching, on the other hand, can be achieved quickly by means of epoxy-based material directly applied to the damaged area of a pipe. It forms a seal preventing further leakage but does not provide as much structural reinforcement as pipe relining. Patching suits small cracks or holes in pipes with which are still in relatively good conditions.

Both of these have their pros, however, again, you need to think about how much damage you’ve done with pipe relining and patching. So if your pipes are severely damaged or want something that’s going to last longer-lasting then pipe re-lining may be right on the mark for you. But if you just have little issues keeping them at bay and need something quick then pipe patching will work temporarily until further fixes can take place.

When you have troubles with your badly damaged pipes, whether pipe relining or patching, feel free to get in touch with Silver Water Plumbing, your local plumber Sydney and the pipe relining experts today. Their expert team of plumbers specializes on all kinds of plumbing works and will serve prompt reliable service to guarantee your satisfaction guaranteed!


Frequently Asked Questions

The price of a pipe relining job in Sydney varies greatly depending on many factors such as how far the pipe is stretched, how complicated the job may be, and where exactly it goes.

The job is usually between $400-$1200 per meter. Note that these are estimates and the cost may vary depending on the specific circumstances of the job.

There are many advantages for pipe relining a sewer or stormwater pipe including:

  • No Digging Required: Unlike traditional pipe repair methods, pipe relining does not involve digging up your yard or disrupting the surrounding area. This means minimal disruption to your daily routine and less damage to your property.
  • Long-lasting Solution Pipe relining provides a durable solution that can last for decades. By creating a new lining within the existing damaged pipe, it effectively seals any cracks, leaks, or weaknesses in the system. This ensures that your stormwater and sewer pipes are restored to their optimal functionality.
  • Versatile Application: Pipe relining works for both stormwater and sewer pipes. Whether you have issues with underground drains, rainwater systems, or sewage lines, pipe relining solutions can effectively address these problems.
  • Cost-effective Alternative: Compared to traditional methods of pipe repair or replacement, pipe relining offers a cost-effective solution. It eliminates the need for costly excavation work and reduces labor and material expenses.
  • Efficient Process: The process of pipe relining is relatively quick and efficient. Highly trained professionals use specialized equipment to insert a resin-lined tube into the damaged section of the pipeline. The resin then hardens over time, creating a new strong inner lining that restores the structural integrity of the pipe.

Pipe relining, depending on the extent of damage normally takes decades to recover meaning a long-term solution to your plumbing problems. Through innovative technology that repairs damaged pipes without need for excavation or replacement pipe, your pipe is durable and resilient against future damage prone to peace of mind as well as saves you from costly repairs down the line. With professional installation, proper maintenance ensures a hassle-free plumbing system that will last years.

Pipe relining requires no excavation or digs, as the method of repairing damaged pipes is non-invasive. The new liner instead of being dug out and placed into the old pipe where it would be allowed to cure in place. Consequently, this yields a seamless durable new pipe within the old one without giving as much time for disruptive excavation work.

Pipe relining is a cost-effective and convenient alternative to fixing damaged pipes that requires no further disruption of your property.

Indeed, pipe relining is possible on pipes of any size. It’s a versatile solution that can serve both for small and large diameter pipes.

Regardless of whether you own a residential or commercial property, pipe relining is an efficient method to repair damaged or deteriorated pipes without the need for excavation or digging.

This is an innovative technique of inserting a liner into the existing pipe, which then hardens and forms anew durable pipe within the old one.

Pipe relining is definitely a cost-cutting choice compared to pipe replacement. Not only will you spend less, but time and headaches too.

Relining pipes doesn’t require extensive excavation or the digging out and replacing pipes. A durable liner is pushed inside the already existing pipe and thus creating a smooth surface that rejuvenates its functionality.

This process is efficient and can extend the life of your pipes for many years to come.

Yes, pipe relining can be used to patch up pipes with extensive damage or corrosion. By means of this creative technique, a new pipeline lining is laid inside the damaged pipe that was previously installed, providing an unbroken and durable solution.

This eliminates the need for expensive and time-consuming pipe replacement. Bestowed with experienced and skilled team of industry-leading plumbers, we give a hassle-free experience as well as 100% satisfaction in our quality workmanship.

Trust us to provide reliable service that prioritizes your plumbing needs. 

So there you have it, when it comes to pipe relining in Sydney, Silver Water Plumbing is the trusted relining company. Our relining products are designed to last, and provide a long lasting solution for pipe problems.

With our experienced relining team of drain relining plumbers and commitment to customer satisfaction, we ensure that your plumbing issues are addressed promptly and efficiently. Using our experienced drain relining plumbers and committing to customer satisfaction, we ensure that your plumbing problems are addressed timely in the right way.

Whether it’s being blocked drains, broken pipes, hot water systems, or sewer pipes, we know how to get the job done right.

Remember, ‘A stitch in time saves nine,’ so don’t wait until your plumbing problems worsen.

Enquire Online

(02) 9199 2055

Popular Blog Posts – Pipe Relining


How To Identify A Blocked Sewer Drain

Posted on
Irrespective of whether it’s a commercial or residential property, a blocked sewer drain is bothersome.  Of course, it emits foul odors, drains water from sinks and bathtubs slowly, and poses…

What Is Pipe Relining & How It Can Help?

Posted on
Got Drainage Issues? When your toilet is not flushing or your drains are clogged, it could be a serious problem. If you’ve tried using a plunger and chemical drain cleaners…

Using RootX to Unblock a Drain

Posted on
Blocked Drain in Sydney?– Tree Roots in your Pipes could be the Cause. Everyone like trees but unfortunately, they may be causing some unseen damage to your property. Trees need…