Free Commercial Heat Pump Hot Water System

Upgrade to an energy-efficient commercial heat pump and save up to 60% off your water heating bill!

The New South Wales Heat Pump Hot Water Rebate provides a low-cost and environmentally friendly alternative for businesses looking for a new hot water system.

Eligible businesses can take advantage of this rebate to cover the cost of installing a new heat pump hot water system, effectively making hot water for business use free of charge.

For businesses, heat pumps are a smart investment because they cut down on electricity use during peak hours and help them save money by avoiding peak demand fees under the government’s Peak Demand Reduction Scheme. They also have a longer lifespan, require fewer service calls, and save money in the long run because they are easier to maintain.

Get your business a free hot water system with this great NSW Heat Pump Hot Water Rebate! Don’t put off getting started and missing out on potential federal and state rebates.

What is this rebate?  

If your a businesses looking for an energy-efficient and cost-effective hot water system solution you’ll be able to take advantage of the NSW Heat  Pump Hot Water Rebate. 

This rebate is available to eligible businesses and will help cover the installation cost of a new iStore 270 litre commercial heat pump hot water  system, meaning you’ll enjoy FREE hot water for your business! 

Don’t miss out on the chance to get a FREE hot water system for your business with this great NSW Heat Pump Hot Water Rebate! Get started  today and make sure you don’t miss out on any available rebates from both state and federal governments. 


What are the benefits of the iStore 270 hot water heat pump?

There’s no doubt that solar is the future, and with the latest rebates provided by the government it is a no brainer to upgrade. These are the reasons  why you should take advantage of this offer: 

  • Drastically reduce your business’ water heating bill by up to 60%.
  • Get your installation fees refunded, making it completely free.
  • Heat pumps require less maintenance than traditional systems, resulting in fewer service calls, extending their lifespan and improving overall cost efficiency.
  • Lower your annual carbon emissions by as much as 4 tonnes a year.

How does the iStore 270 hot water heat pump work?

The iStore hot water heat pump works by using the heat from the ambient air to heat up the water, making it an efficient and cost-effective way to  heat up large volumes of water for your business. Take a look at the below table that shows the weekly running costs of the iStore 270 hot water system compared to other systems.

weekly running cost

Upgrade to an energy efficient commercial heat pump and save up to 60% off your water heating bill!

Hot water heating systems that use less energy are gaining in popularity. When compared to conventional hot water systems, these have the potential to cut running expenses by as much as 60%. The primary reason for this is that they are more energy-efficient because they use ambient air to heat the water. In addition, heat pumps consist of a single moving part (the compressor). This results in less wear and tear and fewer service calls, saving money in the long run.

Businesses can save a lot of money because of the energy efficiency of these systems. Energy-efficient hot water systems have lower operating expenses over time since they use less electricity. A business can get an energy-efficient hot water system for free thanks to the NSW Heat Pump Hot Water Rebate, a program that reimburses the cost of installation.

How much money would my company save if we install a heat pump for our hot water system?

Perhaps you’re curious about the potential cost savings of installing a heat pump for your home’s hot water system. The straightforward response is that you may be able to cut your energy costs by a substantial amount.


Switching to a commercial heat pump hot water system can cut energy use and costs by as much as 60%. Because of their high efficiency and low environmental impact, these systems are a great option for businesses concerned with their impact on the planet.

Businesses can potentially reduce their energy expenses by installing commercial heat pump hot water systems, which may also qualify for tax credits and rebates from the government. It’s important for businesses to research the specific incentives available in their state or territory.

To ensure the best results for their building’s requirements, it’s recommended that businesses hire an experienced heat pump installation professional who can provide advice on selecting the right commercial heat pump hot water system. Ongoing maintenance and support from these professionals can help keep the system functioning at peak efficiency.

By switching to a heat pump for their hot water system, Australian companies can save money and reduce their impact on the environment. Investing in energy-efficient technology is a wise long-term strategy for both cost savings and sustainability.

What are the associated costs of making the switch to an eco-friendly hot water system?

Upgrade costs for energy-efficient hot water systems vary based on several factors. However, commercial businesses located in NSW are in luck! The NSW State and Federal Government Efficient Energy Group is currently providing an incredible offer that includes Energy Efficient Commercial Heat Pumps supplied and installed free of cost. Not only that, the installation is carried out by a fully insured and licensed plumber, making it an excellent opportunity for businesses to transition to eco-friendly practices without incurring any additional costs.

What advantages can a commercial business gain by upgrading their hot water system to a commercial heat pump?

There are many advantages for businesses to switch to a commercial heat pump from an older, more conventional hot water system. Saving money on heating large volumes of water is the main benefit. The reduced amount of energy required to heat the water using a heat pump results in decreased monthly electricity costs. There is less need for repairs and servicing when compared to conventional hot water heaters. The costs of upgrading to a heat pump system can be further reduced by rebates and incentives that businesses may be eligible for based on their location.

If you’re considering upgrading your commercial hot water system, then you might want to think about getting a commercial heat pump free hot water system. Here are some reasons why:

  1. Saving Energy. The energy efficiency of these systems is a primary design goal. Rather than using fossil fuels to heat water, they harness renewable energy from the air around them. Therefore, they can help companies save a lot of money on their energy expenditures over time.
  2. Cost-Effective. Businesses can save money in the long run by installing heat pump free hot water systems, but doing so requires an initial investment. These heating systems can help businesses save money in the long run since they are more efficient and require less maintenance than conventional heating systems.
  3. Eco-Friendly. Heat pump-free commercial hot water systems cut GHG emissions because of their small carbon footprint. Businesses who opt to install such devices may be doing their part to improve the planet.
  4. Versatility. There are a number of uses for commercial heat pump-free hot water systems. They’re adaptable, so you can put one in any business that regularly uses a lot of hot water, like a restaurant, a hotel, or a hospital.

If you’re looking for a commercial hot water solution that won’t break the bank but will save you money and help the environment, consider installing a heat pump-free hot water system.

How Do They Work?

Commercial heat pump free hot water systems work on the principle of heat transfer. The system consists of a heat pump unit and a water tank. The heat pump unit absorbs heat from the surrounding air and transfers it to the water tank. The water tank is insulated to maintain the temperature of the water. When hot water is required, it is drawn from the tank, and cold water is supplied to replace it.

Maintenance of Commercial Heat Pump Free Hot Water Systems

Maintenance of commercial heat pump free hot water systems is crucial to ensure optimal performance and longevity. Regular maintenance can also help identify potential issues before they become major problems. The following are some maintenance tasks that should be performed regularly:

  1. Check the air filters and clean or replace them if necessary. Dirty filters can reduce the efficiency of the system and increase energy consumption.
  2. Inspect the heat exchanger for any signs of damage or corrosion. A damaged heat exchanger can cause leaks and reduce the efficiency of the system.
  3. Check the refrigerant levels and adjust if necessary. Low refrigerant levels can cause the system to work harder and consume more energy.
  4. Inspect the water tank for any signs of leaks or damage. A damaged tank can cause water damage and reduce the efficiency of the system.
  5. Inspect the electrical connections and wiring for any signs of damage or wear. Damaged connections can cause electrical issues and reduce the efficiency of the system.
  6. Schedule an annual service by a qualified technician to ensure the system is working correctly.

Commercial heat pump free hot water systems offer a sustainable and cost-effective way to heat water for businesses. They are energy-efficient, eco-friendly, and versatile, making them an excellent option for various commercial applications. Installing these systems requires professional expertise, and regular maintenance is crucial to ensure optimal performance and longevity.

Enquire Online

(02) 9199 2055